| |
 |
Compared to Block & Beam floors ECO-SLAB can save
£10/m2 |
 |
ECO-SLAB
can be ten times faster than Block & Beam floors |
 |
ECO-SLAB
is future proof, the only system with 0.00 Lateral Thermal
Leakage. |
 |
The
ECO-SLAB has been approved by the BRE & accepted
by the NHBC |
 |
ECO-SLAB
requires less supervision than alternatives, and can
be fitted by one unskilled man |
 |
An
unskilled operative has been recorded as laying ECO-SLAB
at 5mins per m2 including trimming to fit & letting
in services |
 |
There
is no heavy lifting and no crane or other plant equipment
is required. |
 |
ECO-SLAB
is easy & safe to handle, no protective clothing
is required. It does not cause irritation to skin or
Bronchia. It is CFC & HCFC free, manufactured from
Flame Retarded EPS. |
 |
ECO-SLAB is ordered by the m2 and trimmed to fit on
site. |
 |
ECO-SLAB
is manufactured from EPS conforming to BS3837, it is
not effected by micro-organisms, algae or lichens &
is rot proof. |
 |
ECO-SLAB
is manufactured from Expanded Polystyrene which has
a closed structure. It is therefore a water resistant
material. |
 |
The
only tools required are a fine tooth saw & tape |
 |
The
oversite needs to be levelled to 200mm below the underside
of the floor slab. |
 |
Contact
Eco-Slab for details of suitable ECO-SLAB grades. |
 |
ECO-SLAB
grades can be manufactured to suit your project requirements. |
 |
But
boards should be used where point loading, wheel barrows
or heavy foot traffic is expected. |
 |
On
inspection roads built on Polystyrene in Finland in
the 1950s remain unaffected today |
 |
In
use loose components should be secured. Contact with
solvents & organic based materials should be avoided. |
 |
From ECO-SLAB. Allow 7/10 Days |
 |
STYROPACK
UK manufacture ECO-SLAB. Click Styropack to visit. |
 |
Please click the icon to bring up further information. |
